徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
What are the purchasing standards of the broken bridge aluminum doors and windows?
Editor: liefan 11:00:02, August 31, 2019

What are the purchase standards of broken bridge aluminum doors and windows? This is also a problem that customers are worried about, because now many suppliers are doing whatever they can to make profits, which makes many customers suffer a lot of dumb losses! The following Shanghai liefan decoration materials Co., Ltd. for you to analyze the selection criteria of aluminum doors and windows under the broken bridge!

A look at the standard of aluminum doors and windows
The thickness, strength and oxide film of aluminum profiles used for high-quality aluminum alloy doors and windows shall comply with the relevant national standards. The wall thickness shall be more than 1.2 mm, the tensile strength shall be 157 n / m2, the yield strength shall be 108 n / m2, and the oxide film thickness shall be 10 μ M. If not up to the above standards, it means that this is poor quality aluminum alloy doors and windows, can not be used.
Selection standard of broken bridge aluminum doors and windows II: look at processing

High quality aluminum alloy doors and windows, fine processing, exquisite installation, good sealing performance, switch freely. Poor quality aluminum alloy doors and windows, blind selection of aluminum profile series and specifications, rough processing, saw cutting instead of milling processing, installation not in accordance with the requirements, poor sealing performance, not only air and rain leakage and glass burst phenomenon, but also encounter strong wind and external force, easy to pull parts or glass blow or hit, damage and hurt people.

Third look at the price of the selection standard of broken bridge aluminum doors and windows
In general, the cost of high-quality aluminum alloy doors and windows is 30% higher than that of high-quality aluminum doors and windows. The tensile strength and yield strength of some aluminum alloy doors and windows made of aluminum profiles with wall thickness of only 0.6-0.8 mm are much lower than the relevant national standards and are not safe to use.

Production process, equipment and standards of aluminum alloy doors and windows   [ Back to home page ] [ Printing ] [ Back to previous page ]    Meet the sunshine in the back garden

Hot Tags:

Central products