The waterproof treatment of aluminum alloy doors and windows is not a small problem. If the waterproof of aluminum alloy doors and windows is not handled well, there will be a lot of troubles in the future life. The most worrying point is that it rains outside on rainy days, and the water in the room will also flow like a river, because the leakage of aluminum alloy doors and windows will make the indoor walls and floors suffer from bubble damage. So when decorating, we must not ignore the waterproof problem of aluminum alloy doors and windows. Today's article is about the waterproof treatment of aluminum alloy doors and windows. Let's have a look.
First, as the general aluminum doors and windows are concave structure, the top of the window must be made dripping eagle mouth to prevent the capillary phenomenon of rain water.
The waterproof coating should be removed from the left and right sides of the aluminum window to be coated with water.
Third, the windows should be sealed with concrete added with waterproof agent. Please pay attention to adding waterproof agent, because when ordinary concrete is solidified, the concrete will lose water due to water reaction, and the inside is porous. Water will seep from the hole to the interior, while the concrete with waterproof agent is dense and will not seep. (the effect of domestic foaming agent is unknown)
Fourth, window frame and other materials around the junction of waterproof sealant.
Fifth, all the windows should be opened from the top to prevent the water from flowing into the room.
Sixth, glass and aluminum alloy frame material to inject sealant, do not use adhesive tape.
Seventh, it is best to design a boss at the bottom of the window. The convex face is located behind the glass surface, so that the water collected from all sides will not flow into the room along the windowsill.
Eighth, the joint between the sill and the window at the bottom of the window should be designed to face outward rather than upward, and the windowsill must also be designed with an outward facing slope.
Ninth, if it is a single glass, the bottom of the window should be designed in a quarter of the glass condensate diversion hole.
10. Pay attention to the second, third and fourth points on both sides of the window.
The construction should be done around the interface treatment, according to the actual engineering experience, pay attention to the above ten points, doors and windows should not leak.
Summary: after looking at the treatment methods of these aluminum alloy doors and windows, we also have a certain understanding of the waterproof maintenance of aluminum alloy doors and windows. If there is water leakage in your home, don't be nervous. The steps in the installation article will solve the problem quickly.