How to ensure the safety performance of aluminum alloy door?
- Editor: liefan 11:00:05, August 3, 2019
- In the design of aluminum alloy door, the safety of aluminum alloy door should be fully considered to avoid damage caused by unreasonable design in the process of use, which may lead to events endangering personal safety or unsafe factors caused by the use itself. When the height of the external window sill without outdoor balcony to the indoor ground is less than 0.9m, the aluminum alloy side door must adopt safety glass and provide reliable protection measures; for the bay window whose sill height is less than 0.6m, the calculation height shall be calculated from the windowsill surface.
The design and selection of the fixed door opening the door and the floor to floor window glass must comply with the human body impact safety regulations in the current industry standard "technical specification for application of building glass" (jgi113).
Laminated glass and reliable door and window locks shall be used for exterior doors and windows with anti-theft requirements. If locks with multi-point locking device are used, window locks with keys can be used. The locking tools such as handle can also adopt protective measures such as aluminum alloy lattice window, lattice net and protective railings. The sliding door and window sash shall be equipped with a device to prevent removal from the outside of the room.
The glass should be of sufficient thickness under normal use, and should not cause large deformation deflection of insecurity.
In order to avoid the high-rise building windows falling due to blowing when opening, the windows of high-rise buildings should adopt the inner open windows or the push-pull windows with reliable anti falling limit devices. When the sliding window is used for the external wall, there must be a device to prevent the window sash from falling off to the outside under negative wind pressure.
- Is it better to choose plastic steel doors and windows or aluminum alloy doors and windows for balcony sealing? [ Back to home page ] [ Printing ] [ Back to previous page ] How to remove the heat insulation aluminum alloy window? Find out