徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
There are three kinds of glass commonly used in sunshine room
Editor: liefan, January 10, 2020 10:00:01

1、 Tempered glass in sunshine room

Tempered glass is a kind of ordinary glass, which is heated uniformly and cooled uniformly with corresponding cooling rate according to different thickness when it is close to softening point. Strong permanent internal stress is produced inside the glass, and the tensile stress of the inner layer and the compressive stress of the outer layer are in a stable stress equilibrium state. The original physical properties of glass are changed, the original performance of glass is overcome, and the application range is enlarged

Toughened glass has high impact strength (the pressure resistance and impact resistance of toughened glass products are improved by 5 & mdash

It has high bending strength (5 times higher than ordinary flat glass), good thermal stability, smooth and transparent. When it is damaged by strong impact, the fragments are scattered and small particles without sharp edges and corners, so it is a kind of safety glass

2、 Insulating glass

Insulating glass is composed of two or more pieces of float glass. The aluminum alloy frame filled with desiccant is sandwiched between the glass sheets. The aluminum alloy frame and the glass are bonded and sealed with butyl rubber, and then sealed with polysulfide glue or structural adhesive. The heat conductivity of the air is very low, and the dry air is sealed between two layers of glass. This synthetic insulating glass can directly block the loss of heat conduction, so as to achieve energy saving, anti condensation and sound insulation. If the coated glass is used, it has good anti ultraviolet effect.

Toughened insulating glass has all the advantages of toughened glass insulating glass

Application: used in all indoor constant temperature, constant humidity, quiet and comfortable commercial and civil buildings

characteristic:

1. The first butyl rubber seal can prevent water vapor from entering the insulating glass.

2. The secondary sealing of high strength structural adhesive or polysulfide glue ensures the strength of two pieces of glass and aluminum frame.

3. All aluminum frames used are high quality products with excellent heat preservation, heat insulation and sound insulation.

3. Laminated glass (i.e. laminated glass)

Laminated glass has good safety. Due to the bonding effect of the resin lining in the middle, the fragments will not fly away when the glass is broken,

Sunlight room only produces radial cracks, which is safe and does not hurt people, so it is widely used in automobile windshield. At the same time, the impact strength of laminated glass is much higher than that of ordinary glass, and the strength of tempered laminated glass is far greater than that of tempered glass with the same thickness, so it is not easy to be broken when impacted. Laminated glass has the above performance, but also has a unique anti-theft function, because it is not easy to break into, so it is relatively safe.

U-shaped glass: a new type of insulating glass, suitable for making the roof of sunlight house.

Temperature shield glass: a new type of heat insulation glass, which is insulated by special coating on glass.

(ordinary glass can't match the above ones in terms of price and other functions)

The difference between broken bridge aluminum alloy doors and windows and common doors and windows   [ Back to home page ] [ Printing ] [ Back to previous page ]    How about safety and comfort performance of bridge broken aluminum doors and windows

Hot Tags:

Product Center