In the decoration, many owners choose to choose aluminum alloy window. The following will introduce the standard process of aluminum alloy window installation. The general process of aluminum alloy window installation is: marking and positioning → aluminum alloy window draping installation → anti-corrosion treatment → aluminum alloy window installation → aluminum alloy window fixation → window frame and wall gap treatment → window sash and window glass installation → hardware accessories installation.
1. Marking and positioning
According to the installation orientation, scale and elevation of the window in the planning drawing, the window edge line is measured to both ends according to the window center line. If it is a multi-storey or high-rise building, the window edge line on the top floor shall prevail, the window edge line shall be led downward with a line drop or theodolite, and the window on each floor shall be marked with lines, and some irregular edges shall be chiseled. The horizontal orientation of the window shall be based on the horizontal line of + 50cm inside the floor. The elevation of the lower skin of the window shall be measured upward, and the line shall be snapped for alignment.
2. Installation of aluminum alloy window
Batch of water refers to the upper part of the window sash to prevent the rain from infiltrating into the indoor profile. According to the requirements of construction drawings, the draught shall be fixed on the aluminum alloy window, and the correct orientation and strong installation shall be ensured.
3. Antiseptic treatment
If required by the planning, the anti-corrosion treatment of the exterior surface around the window frame shall be treated according to the planning requirements. If there is no requirement in the planning, anti-corrosion coating or plastic film can be applied for protection to avoid direct contact between cement mortar and the surface of aluminum alloy window, resulting in electrochemical reaction and corrosion of aluminum alloy window. When installing aluminum alloy window, it is better to use stainless steel parts for connecting parts. Otherwise, it is necessary to carry out anti-corrosion treatment to avoid electrochemical reaction and corrosion of aluminum alloy window.
4. Installation of aluminum alloy window in place