Although aluminum alloy doors and windows do not need to be installed in person, they also need to know some matters needing attention when decorating. The decoration of aluminum alloy doors and windows seems simple, but there are still many problems that need to be paid attention to. Let's learn about the problems of aluminum alloy doors and windows in decoration with liefan door and window.
Do you know the precautions of installation of aluminum alloy doors and windows?
1、 The gap of aluminum alloy doors and windows is too large
If the decoration time gap is too large, or the installation is not vertical to the ground, the aluminum alloy doors and windows can be removed and planed again until they are consistent. The installation of vertical can be solved.
2、 Poor quality of hardware
If the hinge of the side door is not correct, it will also lead to the level and tidiness of the frame and the door and window. The screw fixing the aluminum alloy door and window can be re reinforced and the inclination of the door and window and the frame sleeve can be adjusted in order. It is easy to tighten, but do not adjust the screw too much. If it is tightened at one time, it is easy to cause too tight or too loose, and there is a sense of swing. The upper screw should be kept straight, half of which should be screwed first and then tightened.
3、 Aluminum alloy door and window switch is not smooth
Generally, it is due to the incorrect installation of door and window latch. In addition to the unsuitable size of the lock, there is also a biggest reason that the lock tongue is not aligned with the plate. It is better to mark before installation.
4、 The sliding door is laborious
Generally, the reason for this situation is that the upper and lower track slots are not vertical. When they are not in the same vertical direction, the track can be unloaded first, and the center of the upper and lower rails and the rail groove can be aligned with the vertical ruler.
5、 Other considerations
The rigidity of the overall frame is not enough, the aluminum alloy doors and windows are hard to open and close, and the shaking phenomenon appears in windy and rainy days, which may be due to the unsuitable material or insufficient hardness stress. Or is the aluminum alloy door and window material does not meet the requirements. Or not up to standard.