徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
The skill of using sealant to install doors and windows
Editor: liefan, September 26, 2019 17:00:01

Doors and windows need to be customized before installation, which is due to the different sizes of windows. In order to prevent the size of doors and windows from being different from the windows, it is necessary to take some preventive measures for the inconvenience of installation. General doors and windows in the installation will be found between the doors and windows and the wall gap, these gaps will affect the sealing of doors and windows, sealing and thermal insulation can not be achieved, so energy conservation and thermal insulation can not be guaranteed. How to deal with these gaps? Is it allowed to stay like this all the time?

 The skill of using sealant to install doors and windows

Shanghai door and window company will teach you some installation glue knowledge today. That is to say, these gaps are inseparable from the use of glue. It is normal for doors and windows to fill the gaps with glue in installation, but how to use glue and what kind of glue is very tricky. Doors and windows in the design time will shorten the size, and then in the big gap with Styrofoam filled. The styrofoam must wait until it has dried up and then cut off the excess with a knife. After that, use the sealant to seal the surface of the foamed adhesive that has been opened again.

The above is the installation of doors and windows need to use glue. There are two types of glue for installation of doors and windows, which are foam rubber and waterproof sealant, which have been mentioned before. In addition, if you want to install high-grade doors and windows, such as broken bridge aluminum doors and windows, glass glue is generally used. After the doors and windows are sealed with sealant, attention should be paid to this in the process of daily use. For example, the sealant should be paid attention to whether it falls off and whether there are gaps in doors and windows. After that, the sealing should be treated according to the use of doors and windows. Once the gap is found, seal it with sealant. In this way, the performance of doors and windows can be guaranteed, and doors and windows can be used for a longer time.

How to install doors and windows   [ Back to home page ] [ Printing ] [ Back to previous page ]    Is the high-grade sunlight room and the good sunlight room the same concept?