徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
Two aluminum alloy window air leakage solutions
Editor: liefan 20:00:09, August 12, 2019
As the Chinese New Year approaches, the weather has been sunny for a few days a few days ago, but recently, not only has the temperature been cold, but also the sky is gray. In such a season, how to keep the cold air out of the house and keep the room air fresh enough?

Solution to air leakage of aluminum alloy window

It's windy in winter. If you sit near the window, although the window is closed and the air conditioner is on, you can often feel the chilly cool wind. At this time, it is possible that the aluminum alloy window has air leakage. At this time, there are two aluminum alloy window air leakage solutions to solve this problem.

There are two ways to feel the position of the wind

One possibility is that the wall is loose and the sealing between the window frame and the wall is reduced, resulting in the wind coming in from the cracks.

The other is the aging of the sealing strip at the connection between the glass and the frame of the window, which accumulates dust in the process of long-term use, and is increasingly worn, which reduces the ability to prevent wind and sand.

 Two aluminum alloy window air leakage solutions

Sealing strip

For the first case, consumers can contact a professional to come back and glue again, or do it yourself. The specific method is to simply clean the joint between the frame and the wall, and use the glass sealant to hit the inside and outside of the frame. The width of the adhesive layer should be kept at about 5-10 mm.

Tips: the use of sealing strip and sealant should be determined according to the damage degree of windows. For example, some seals are in good condition, and there is no air leakage when the wind blows, so it is not necessary to replace them. One disassembly and one installation is not conducive to the sealing of the gap. If the cracks between the frame and the wall are serious, it is recommended to contact professionals and refill with Styrofoam to ensure that the connection between the frame and the wall is firm.

Gluing

If the second case, you can buy the sealing strip in the building materials market, and then install it by yourself or contact a professional. Self installation is also very simple. The glass sealing strip is rubber and inserted into the slot on the edge of the glass. When replacing, you just need to pull out the new sealing strip with a screwdriver, and then tap the new sealing strip.

Under the different circumstances described above, two aluminum alloy window air leakage solutions can effectively solve this problem. If you encounter the phenomenon of aluminum alloy window air leakage solution, you may as well try.


Jian Fan narrow cool aluminum alloy doors and windows: narrow to the limit, beauty without boundaries   [ Back to home page ] [ Printing ] [ Back to previous page ]    It is not too late to know the four points that must be paid attention to when installing aluminum alloy windows

Hot Tags:

Product Center