徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
What kinds of opening methods of aluminum alloy doors and windows have and what are their advantages
Editor: liefan 14:00:05, August 7, 2019
With the rapid development of the door and window industry and the higher and higher requirements of consumers, China's doors and windows products are becoming more and more diversified, and the opening methods of doors and windows are also more and more diversified. So, as consumers, how should we choose aluminum alloy doors and windows products? Which way of opening doors and windows is suitable for us?

 What kinds of opening methods of aluminum alloy doors and windows have and what are their advantages

1、 Aluminum alloy doors and windows of overhanging type

The aluminum alloy doors and windows with overhanging type is a new opening mode developed on the basis of casement windows. There are two ways to open it, either horizontally or not. When the casement window is closed, push the upper part of the window outward to open a gap of about 10 cm. That is to say, the window can be turned over a little from the top. The opened part is suspended in the air and connected with the window frame through hinges and so on. Therefore, it is called up hanging type. Its advantages are: it can ventilate and ensure safety. Due to the hinge, the window can only be opened by 10 cm, and the hand can not come in from outside. It is especially suitable for use when no one is at home. This kind of window can not only be used to open the window.

2、 Aluminum alloy doors and windows of horizontal opening type

There are two kinds of horizontal opening type aluminum alloy doors and windows: the advantages are large open area, good ventilation, good sealing, excellent sound insulation, heat preservation and impermeability. It is convenient to clean the windows with the inner open type, while the outer type does not take up space when it is opened. The defect is that the window is small and the vision is not wide. When the external window is opened, it will occupy a space outside the wall, which is easy to be damaged when the strong wind blows; and the inner window is to occupy part of the indoor space, and the use of yarn mesh is not convenient, such as the quality is not up to standard, it may also seep rain.

3、 Push pull aluminum alloy doors and windows

Push pull type of aluminum alloy doors and windows: the advantages are simple, beautiful, large window width, large glass block, wide vision, high lighting rate, convenient glass cleaning, sensitive use, safe and reliable, long service life, open in a plane, less space occupied, convenient home decoration mesh, etc. Now, the most popular one is sliding window. Its most deficient place is that the two windows can not be opened at the same time, and the ventilation is relatively poor.

4、 Fixed type aluminum alloy doors and windows

Fixed type of aluminum alloy doors and windows can not be opened, there is no window sash, only glass can be fixed on the window frame. Sometimes a sash is provided to produce the same facade effect as other windows, but the sash is fixed to the window frame. Fixed windows are only used for daylighting and overlooking. They are usually used in occasions where only daylighting is considered and ventilation is not considered. Due to the fixed window sash, the glass area can be slightly larger.

Generally speaking, in addition to the above introduction, there are many styles for opening aluminum alloy doors and windows. How to select the opening mode of aluminum alloy doors and windows needs to combine the space size and environmental conditions of their own home environment, and emphatically select different types of aluminum alloy doors and windows.

Tips for maintenance of aluminum alloy door   [ Back to home page ] [ Printing ] [ Back to previous page ]    How much money does suniman aluminum alloy doors and windows cost

Hot Tags:

Product Center