徐州附近想过夜电话联系

Welcome to Shanghai liefan doors and windows official website
Tips for maintenance of aluminum alloy door
Editor: liefan, August 7, 2019 11:00:06
It is believed that many families have installed aluminum alloy doors and windows. It is said that the most troublesome part of aluminum alloy door and window knitting is to maintain and clean. I believe everyone is also. I have to find some tips for cleaning and maintaining doors and windows to share with you.

 Tips for maintenance of aluminum alloy door

1、 Attention should be paid to the cleaning of aluminum alloy doors and windows. Neutral detergent or soft cloth should be used to wipe with clean water. Generally, the soap and washing powder we use are alkaline.

2、 Avoid to use, dirty powder, toilet detergent and other strong acid-base detergent can not be used, so it is easy to damage the door material type, causing certain damage to doors and windows.

3、 There are always some problems with the long-term use of door and window glass. The aging and falling off of sealing wool and glass glue will cause air leakage and water leakage, and the rust of screws and screws will cause the door and window frame to loosen. Therefore, if there is any problem, it is necessary to change it in time.

4、 It is necessary to check the frame connection parts of aluminum alloy doors and windows, and whether the hardware parts are worn out. Positioning shaft pin, wind support, ground spring and other vulnerable parts of aluminum alloy doors and windows, to ensure that they are flexible and clean, regularly add lubricating oil and tighten loose screws.

5、 In areas where the rain is particularly frequent, metal doors and windows are relatively easy to rust, which is the same as the surface layer of aluminum alloy doors and windows with a layer of protective film. Every time it rains, wipe the doors and windows wet by rain in time, and its chute is the same, so can't let the water stay on it.

6、 Aluminum alloy doors and windows in the use of light action, hard push and hard pull is absolutely not allowed, first remove the fault, the general push and pull difficulties are due to the door and window deformation, dust, rust reasons.

7、 Therefore, in order to keep the ore body clean, especially the cleaning of the push-pull groove, it is necessary to use a vacuum cleaner to absorb the dust in the groove and the door sealing wool. Push and pull groove used for a long time, but also add some or paint a layer of wax oil yo!

Aluminum alloy doors and windows are not tightly closed mainly due to two reasons, quickly check   [ Back to home page ] [ Printing ] [ Back to previous page ]    What kinds of opening methods of aluminum alloy doors and windows have and what are their advantages

Hot Tags:

Product Center