With the increasingly exposed disadvantages of log doors and windows and plastic steel doors and windows, their market position has also begun to shake, aluminum alloy doors and windows should come into being, quickly occupying a place in the door and window market. Today, I will popularize the correct installation of aluminum alloy doors and windows.
First, the preparation work should be done well before installation. Before installation, check to see whether the hardware fittings of doors and windows are in good condition, whether the connection is fit, whether there are scratches on the surface of the door and window frame. If there are scratches, appropriate treatment should be done. If the traces are still obvious, you need to contact the dealer for replacement. In addition, the inspection of doors and windows also includes the problem of detail treatment at the edges and corners. For parts that are too sharp and may cause scratches, polishing paper should be used. Generally, in order to protect the surface from scratching, the surface of window frame will be covered with a thin protective film, which can effectively protect the integrity of the surface of the framework, and can be torn off after installation.
Second, installation is carried out. The first step in the correct installation of aluminum alloy doors and windows is to mark and locate. The marking of doors and windows is to have a measuring ruler in the center of the following process. After the marking is completed, the installation of the draught can be carried out. According to the requirements of the construction drawings, the draught shall be fixed on the aluminum alloy window, and the position shall be correct and firm.
Third, the next step is to carry out anti-corrosion treatment and caulking. The anti-corrosion treatment of doors and windows is to avoid the corrosion of windows in the process of future use, and the anti-corrosion treatment can make the service life of doors and windows longer. When filling the gap between the window and the wall, you should pay attention to whether the filling material has completely filled the gap between the window and the wall. You can tap the window with your finger and listen to the sound judgment.