Aluminum alloy doors and windows production seems simple, in fact, is not a very easy thing. In order to save materials, some businesses often adopt the method of short size. In this way, the actual size is much less than the measured size, so that businesses can obtain a lot of profits. Therefore, Xiaobian is here to teach you how to make aluminum doors and windows, so that you can clearly choose a good business. For aluminum doors and windows, there are the following main steps:
The fourth step is installation
After the above steps are completed, the rest is the installation work. The window and door shall be fixed according to the installation position and environment. The fixing methods generally include expansion screw, steel nail and so on. The joint position can be sealed with sealant. The effect of installation should be considered when installing.
The fifth step is acceptance
Check the original design one by one, including the interface of windows and doors, and the contact points between glass and aluminum frame to see if there are burrs or defects at these points. Check the tightness of the window, and check the sound insulation effect if required.
Through the simple description above, do you have a new understanding of the production method of aluminum doors and windows? In fact, from the introduction above, the production of aluminum doors and windows is not very difficult, as long as we grasp a few key points, then other operations will become quite simple. In addition, friends who want to do it by themselves can also according to this description, go to the building materials market to buy materials and process them by themselves. As for tools, you can also go to the hardware store for processing.